New Page 2

Conferences

Quick links:

CIT

EEE

MCE

ITS

EEC

DEPARTMENT OF COMPUTER SCIENCE AND INFORMATION TECHNOLOGY (CIT)

Prof. Dr. M. A. Mottalib
Head

1. Syed Khairuzzaman Tanbeer, Golam Sorwar and M.A. Mottalib, Study on phonemes for Bengali Voice Recognition, International Conference Computer and Information Technology (ICCIT) 2000, 25-26 Jan, 2001. Awarded the only GOLD MEDAL for the best paper of the Conference.

2. M. Hossain, M.E. Karim, M.A. Mottalib and S. Hasan, "An improved sorting algorithm", International conference on computer and information technology (ICCIT), pp. 220-223, 18-20 December, 1998, Dhaka.

3. Md. Rafiqul Islam, M.A. Mottalib and Abusaleh M. Jabir, "An improved design of testability of PLAs with input decoder augmentation", Proceedings of International Conference on Computer and Information Technology, Sylhet, pp.279-283, December 1999.

4. Syed Khairuzzaman Tanbeer, M.A. Mottalib, Md. Enamul Karim and Amin Ahsan Ali, "A Neural Network Model for News Categorization", Proceedings of International Conference on Computer and Information Technology, Sylhet, pp.254-258, December 1999.

5. Sarder Anisul Haque, Mostafa Al-Masum, and M.A. Mottalib, An Efficient Algorithm for finding out the movement of m-th disk of the Tower of Hanoi, ICCIT2000, 25-26 Jan, 2001.

6. Syed Khairuzzaman Tanbeer, Md. Enamul Karim and M.A. Mottalib, Proximity analysis to resolve multiple winner situation in nearest neighbour schemes, International Conference Computer and Information International Conference Computer and Information Technology ICCIT2000, 25-26 Jan, 2001, pp. 205-209.

7. Monirul Islam Sharif, Md. Enamul Karim, Abdun Naser mahmood and M.A. Mottalib "Another Tip for Secure RSA Key Selection", Proceedings of ICCIT 2001, 28-29 December 2001, Dhaka, pp. 283-286.

8. Fahim Kawsar, Shariful Hasan Shaikot, Md. Shahariar Saikat, Md. Abdur Razzaque, M.A. Mottalib "An Efficient Token Based Algorithm for Mutual Exclusion in Distributed System", Proceeding of the International Conference on Computer and Information Technology (ICCIT), 27- 28 December 2002, East West University, Dhaka, pp. 93-97.

9. Fahim Kawsar, Shariful Hasan Shaikot, Md. Shahariar Saikat, Md. Abdur Razzaque, M.A. Mottalib "An Efficient Dynamic Scheduling Algorithm in Distributed System", Proceeding of the International Conference on Computer and Information Technology (ICCIT), 27- 28 December 2002, East West University, Dhaka, pp. 97-100.

10. Mahbubul Syed, Fazlul Hasan Siddiqui, Abu Saleh Abdullah Al-Mamun, Syed Khairuzzaman Tanbeer & M.A. Mottalib, "Bengali Character Recognition using Bidirectional Associative Memories (BAM) Neural Network", pp. 247-251, ICCIT-2002, Dhaka, 27-28 December 2002.

11. Mohammad Zakir Hossain Sarkar, Shaila Rahman and M.A. Mottalib, "Design & Implementation of Bottom-up Context-Sensitive Algorithms for Bengali Parser in Natural Language Processing", pp. 332-337, ICCIT-2003, Dhaka, December 2003.

12. Sabbir Ahmed, Md Obaidur Rahman, Saifur Rahman Pir, M.A. Mottalib and Md. Saiful Islam, "A New Approach Towards the Development of English to Bangla Machine Translation System", pp. 360-364, ICCIT-2003, Dhaka, December 2003.
13. Aloke Kumar Saha, Mrinmoy Barua, Mahbub Ahmed and M.A. Mottalib "Design and Implementation of Bi-Directional Heuristic Search Algorithm: A New Approach", pp-48-52, ICCIT-2004, Dhaka, December 2004.

14. Mahbub Ahmed, Aloke Kumar Saha, Mironmoy Barua and M.A. Mottalib, "Query Processing for an Internet Based Application: An Adaptive Approach", pp-458-463, ICCIT-2004, Dhaka, December 2004.

15. Abu Sayeed Md. Sohail, A.A.M. Mahmudul Haque and M.A. Mottalib, "Rotation Independent Image Object Recognition Using Automatic Feature Extraction and Artificial Neural Networks", pp-504-509,ICCIT-2004, Dhaka, December 2004.

16. Sardar Anisul Haque, Mohammad Zahidul Hasan Bhuiyan, Tareque Mohmud Chowdhury, M.A. Mottalib and Kazi Abu Baker Siddique, "Proposal for a Secured File System: Virtual Navigation File System", pp-871-877,ICCIT-2004, Dhaka, December 2004.

17. ASM Sohail, Md. Rabiul Islam, Boshir Ahmed and M.A. Mottalib, "Improvement in existing offline Bangla Character Recognition techniques introducing sustainability to rotation and noise, NCCPB-2005, Dhaka, 18-19 Feb, 2005.

18. ASM Sohail, Md. Mahbubur Rahman Chowdhury, Md. Rabiul Islam, Nazrul Islam Mondol and M.A. Mottalib, "Development of a web based Bangla SQL interface implementing keyboard parsing techniques", NCCPB-2005, Dhaka, 18-19 Feb, 2005.
19. M. Zakir H. Sarker, Shaila Rahman and M.A. Mottalib, "Bottom-up Parsing Algorithms for Bengali Parser to Maintain the Fitness of Word Order", NCCPB-2005, Dhaka, 18-19 Feb, 2005.

20. Md. Rabiul Islam, ASM Sohail, Md. Wasedul H. Sadid and M.A. Mottalib, "Bangla Speech Recognition using Three Layer Back-Propagation Neural Network", NCCPB-2005, Dhaka, 18-19 Feb, 2005.

21. Al Mukaddim Khan Pathan, Md. Abdul Mottalib and Minhaz Fahim Zibran "An HTP-WAP Framework to Bring Coherence in Wired and Wireless Internet Ensuring Better Mobile Internet Security" published in Workshop on Prospects and Problems of Mobile and Land Phones in Bangladesh, Independent University, Bangladesh November 17, 2005

22. Fazle Rabbi, Sakhawat Hossen, Mainur Rahman, Sardar Anisul Haque, M. A. Mottalib "A New Particle Swarm Optimizer Vaccinated By Artificial Immune System (PSOVIS) For Constrained Nonlinear Optimization Problems",ICCIT-2005, Dhaka, December 2005.

23. Fazle Rabbi, Sakhawat Hossen, Mainur Rahman, Sardar Anisul Haque, Dr. M. A. Mottalib "Particle Swarm Optimizer with Immune Technology (PSOIT): A New Hybridized Optimization Technique for Solving Multi-objective Optimization Problems"ICCIT-2005, Dhaka, December 2005.

24. Boshir Ahmed, Mohammad Tariqul Islam, Kazi Abu Taleb, Abu Sayeed Md. Sohail and M. A. Mottalib "Solving Traveling Salesman Problem Using Genetic Algorithm and Ant Colony Optimization Technique - A Comparative Study",ICCIT-2005, Dhaka, December 2005.

25. Md. Murad Hossain, Abu Sayeed Md. Sohail, Md. Shamsul Alam, M A Mottalib "Step Error Tolerance BPN Learning Algorithm"- A Proposed Algorithm for Multi Layer BPN with Reduced Learning Time",ICCIT-2005, Dhaka, December 2005.

26. Al Mukaddim Khan Pathan attended and presented the paper entitled "An Internet Framework to Bring Coherence Between WAP and HTTP Ensuring Better Mobile Internet Security" written by him, M. A. Mottalib and Minhaz Fahim Zibran in the 8th IEEE International Conference on Advance Communication Technology, Korea, held in 20-22 February 2006.

27. Prof. Dr. M. A. Mottalib presented and attended a paper entitled "BPLC: Proposed Approach to Implement e-Governance in Remote Areas of Developing Countries" for 5th International Conference on ICT and Higher Education (Theme: e-Governance) held at Waseda University, Tokyo, Japan during June 26-29, 2006.

28. A Paper of Prof. Dr. M. A. Mottalib entitled "Programming Contest and Present Job Market Situation for ICT Professionals in Bangladesh" has been published in the Souvenir of the East West University Inter-University Programming Contest (EWUIPC) 2006.

29. Mohammad Zakir Hossain Sarker, Shaila Rahman, M A Mottalib "Parsing Algorithms for Bengali Parser to Handle Affirmative and Negative Sentences" International Conference on Computer Processing of Bangla (INCCPB) 2006 at Independent University, Bangladesh: 17 February 2006.

Tareque Mohmud Chowdhury
Assistant Professor

1. Md. Saiful Islam, Tareque Mohmud Chowdhury, "Humar Resource Development and Alleviation of Poverty: Combating with Enabling Information Technology", Proceddings of the 7th Annual Paper Meet (APM) and 2nd International Conference, 25-27 Oct.2001,IEB Dhaka.

2. Sardar Anisul Haque, Tareque Mohmud Chowdhury, "A NewEvolutionary Optimization Model Using Fuzzy Logic Controller", publishedin the proceedings of the conference ICCIT-2003 held on 19-21 December 2003at Jahangirnagar University,Dhaka, pp.53-56.

3. S.M. Milky Mahmud, Nazib Shahrier, A.S.M. Delwar Hossain, Tareque Mohmud Chowdhury and Md. Abdus Sattar, An Efficient Segmentation Scheme for the Recognition of Printed Bangla Characters, Proceedings of the 7th International Conference on Computer and Information Technology (ICCIT) held on 26-28 December 2004 at BRAC University, Bangladesh.
4. Tareque Mohmud Chowdhury, Md. Ferdous Alam Siddique, Rifta Hossain and S.M. Selim Reza, A Secure E-Commerce Model for Bangladesh using Various Local Pre-paid and Debit Cards, Proceedings of the 7th International Conference on Computer and Information Technology (ICCIT) held on 26-28 December 2004 at BRAC University, Bangladesh.

5. Sardar Anisul Haque, Mohammad Zahidul Hasan bhuiyan, Tareque Mohmud Chowdhury, Md. Abdul Mottalib and Kazi Abu Baker Siddique, Proposal for a Secured File System: Virtual Navigation file System, Proceedings of the 7th International Conference on Computer and Information Technology (ICCIT) held on 26-28 December 2004 at BRAC University, Bangladesh.

Abu Raihan Mostofa Kamal
Assistant Professor

1. "Enhanced Security of AODV Protocol in Mobile Ad Hoc Networks" by Abu Raihan Mostofa Kamal, Lutful Karim, Hafiz Md. Hasan Babu and Md. Shariful Islam. First International Conference on Next-Generation Wireless Systems 2006 (ICNEWS2006). IEEE Communication Society. Held on 2-4 Jan-2006, at Dhaka, Bangladesh

2. "Susc2.tible SQL Detector (SSD) - a Parser-based Security Solution to Prevent SQL-Injection Attack" by Md. Sarwar Morshed, Abu Raihan Mostofa Kamal, Abu Saleh Muhammad Barkat Ullah.8Th International Conference on Computer and Information Technology (ICCIT 2006). Held on 28-30 Dec-2005, at Gazipur, Bangladesh

Choudhury Muhammad Mufassil Wahid
Assistant Professor

1. "E-Learning in the context of current ICT infrastructure of Bangladesh", Proceedings of Conference on Methods, Materials and Tools for Programming Education, Tampere, Finland, (May, 2006).
2. "Recommendations for Bangladesh towards E-Learning Readiness", Proceedings of Conference on Methods, Materials and Tools for Programming Education, Tampere, Finland, (May, 2006).

Sardar Anisul Haque
Assistant Professor

1. "Particle Swarm Optimizer with Immune Technology (PSOIT): A New Hybridized Optimization Technique for solving Multi-objective Optimization Problems", published in the proceedings of the conference ICCIT-2005 held on 28-30 December 2005 at Dhaka, Bangladesh, pp. 75-80.

2. "A New Particle Swarm Optimizer Vaccinated by Artificial Immune System (PSOVIS) for Constrained Nonlinear Optimization Problems", published in the proceedings of the conference ICCIT-2005 held on 28-30 December 2005 at Dhaka, Bangladesh, pp. 34-39.

3. "Optimization Model for Opportunistic Replacement Policy Using GA With Fuzzy Logic Controller" published in the proceeding of the IEEE Congress on Evolutionary Computation, 2003 held on 10-12 December 2003 in Canberra, Australia, , pp. 2837-2843.

4. "A New Evolutionary Optimization Model Using Fuzzy Logic Controller", published in the proceedings of the conference ICCIT-2003 held on 19-21 December 2003 at Jahangirnagar University, Dhaka, pp. 53-56.

5. "An Efficient Algorithm for Testing Dependency Preservation of Relational Database System", published in the proceedings of the conference ICCIT-2003 held in 19-21 December 2003 at Jahangirnagar University, Dhaka pp. 473-476.

6. "Legal Issues Regarding E-commerce Among the OIC Member Countries" published in the proceedings of the conference " The Impact of E-commerce and Use of IT in the Promotion & Development of the OIC Trade" at Tunisia 10-12 June, 2003.

7. "An Efficient Algorithm for Finding out the Movement of the m-th Disk of the Tower of Hanoi" was published in the proceedings of the conference ICCIT-2000 held in North South University, Dhaka (25-27th January,2001), pp. 12-16.

S M Faisal
Lecturer

1. Md. Ahsan Arefin, S M Faisal, M.A.Mottalib, "Grid Security: Different Approaches and Aspects", WORLDCOMP, 2007 conference of International Conference of Grid Computing and Applications, Las Vegas, USA, June, 2007

2. Md. Rahat Hossain, Abdullah Azfar, Golam Shagadul Amin Talukder, S M Faisal, Abdullah Al Hasib - " Designing an ATM Network Based on distributed database Systems " Journal of Engineering and Technology (JET), volume-5, No-1, Jan-June 2006, Islamic University of Technology (IUT), Bangladesh. ISSN: 1684-4144, pp. 37-45.

3. Abu Hanifa Mohammad Abdul Hasib, Mohammad Masud Imtiaz Munna, S M Faisal, M. Fahim Ferdous Khan - "A Review on Different Intrusion Detection Techniques for Ad Hoc Networks" International Conference of Computer And Information Technology (ICCIT-2005), Islamic University of Technology (IUT), Bangladesh, 28-30 December, 2005. ISBN: 984-32-2873-1. pp. 869-874.

Abdullah Al Hasib
Lecturer

1. A paper entitled "A Disruption Tolerant Content-Aware Video Streaming Approach for Real-Time Multimedia Data with Appropriate Error Concealment Method" has been published in the proceedings of International Conference of Computer And Information Technology (ICCIT-2005), held in Islamic University of Technology (IUT-OIC), Bangladesh on the 28-30 December, 2005. ISBN: 984-32-2873-1. pp. 153-158.

2. A paper entitled "Optimization of the SCTP Congestion Control Procedure and Evaluation of its performance using NS-2 " has been published in the proceedings of International Conference of Computer And Information Technology (ICCIT-2005), held in Islamic University of Technology (IUT- OIC), Bangladesh on the 28-30 December, 2005. ISBN: 984-32-2873-1. pp. 205-209.

3. A paper entitled "Industry-Academia Collaboration: From Academia's point of view" has been presented in Inter University CPC, 2006.

Abdullah Azfar
Lecturer

1. A paper titled "Summarization of Web Pages by Keyword Extraction and Sentence Vector" has been accepted and published in the proceedings of International Conference of Computer And Information Technology (ICCIT-2006), held in Independent University, Bangladesh (IUB), Bangladesh on the 21-23 December, 2006.

2. A paper titled "A Simplified Process for Grid Job Migration" has been accepted and published in the proceedings of International Conference of Computer And Information Technology (ICCIT-2005), held in Islamic University of Technology (IUT), Bangladesh on the 28-30 December, 2005. ISBN: 984-32-2873-1. pp. 706-709.

3. A paper titled "Design of an Interactive Bangla Mobile Keypad Based on Phonetics" has been accepted and published in the proceedings of International Conference of Computer And Information Technology (ICCIT-2004), held in Brac University (BU), Bangladesh on the 26-28 December, 2004. ISBN: 984-32-1836-1. pp. 658-660.

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING (EEE)

Prof. Dr. K. Siddique-e-Rabbani

1. K S Rabbani, M J Alam, M A Salam, Frequency distribution of F-latencies (DFL) - a new parameter for the diagnosis of neurological disorders, Abstracts, International Clinical Neurophysiology Update Conference, Bangalore, India, April 2007
2. K.S. Rabbani, Distribution of F-Latency: finding of a new neuro-physiologically important parameter, Invited Lecture, Abstracts, International Physics Symposium, Dhaka, May, 2007

3. T M Azim and K S Rabbani, Study of different configurations of Bioelectrical amplifier to maximize common mode rejection, Abstracts, International Physics Symposium, Dhaka, May, 2007

4. A A Mamun and K S Rabbani, Diagnosis of Cervical Spondylosis using newly discovered DFL method: validation using MRI, Abstracts, International Physics Symposium, Dhaka, May, 2007

5. M A S Karal and K S Rabbani, A new four-electrode Focused Impedance Measurement (FIM) system for physiological study, Abstracts, International Physics Symposium, Dhaka, May, 2007

6. Fatima and K S Rabbani, Study of randomness of motor nerve backfiring for different stimulation intervals, Abstracts, International Physics Symposium, Dhaka, May, 2007

Md. Mosharrof Hossain Sarker
Assistant Professor

Md.Mosharrof Hossain Sarker " Towards Agent-Based Collaborative Design", Leading the Web in Concurrent Engineering - Next Generation Concurrent Engineering , CE-2006, France, IOS Press, Vol.143, pp. 169-178, 18-22 September 2006, ISBN 1-58603-651-3.

Shahriar Rahman
Lecturer

1. Islam, AHMR; Shafik, R.A.; Rahman, M. Shahriar; Song, J.B, "On The Nonlinear Distortion Effect in an OFDM-RoF Link " ICET-2006, Pakistan, 2006, pp.20-26, ISBN-1-4244-0503-3.

2. Shafik, R.A; Rahman, M. Shahriar; Islam, AHMR; Ashraf, N.S, "On The Error Vector Magnitude As A Performance Metric and Comparative Analysis", ICET - 2006, Peshawar/Pakistan, 2006, pp.27-31, ISBN - 1-4244-0503-3.

3. Shafik, R.A; Rahman, M. Shahriar; Islam, AHMR, "On the Extended Relationships Among EVM, BER and SNR as Performance Metrics." ICECE - 2006, Dhaka/Bangladesh, pp- 408-411, ISBN - 98432-3814-1.

4. Shafik, R.A; Rahman, M. Shahriar; Adnan, N. A; Islam, M. sajedul, "On The Lempel-Ziv-Welch Coded Speech Transmission and Markov Chain Detection", ICET-2006, Peshawar/Pakistan, pp.183-187, ISBN - 1-4244-0503-3

Riaz Raihan Haque
Lecturer

M. Abdul Awal, Kazi Toufiq Wadud, Riaz Raihan Haque, Md. Ziaul Haque, Md. Jahangir Alam, "A common core network approach utilizing fiber optic transmission system for Bangladesh", International Conference of Computer And Information Technology (ICCIT) , IUT, Bangladesh. pp.175-178.

Naseeb Ahmed Adnan
Lecturer

1. Shafik, R.A; Rahman, M. Shahriar; Adnan, N. A; Islam, M. sajedul, "On The Lempel-Ziv-Welch Coded Speech Transmission and Markov Chain Detection", ICET-2006, Peshawar/Pakistan, pp.183-187, ISBN - 1-4244-0503-3.

A.S.M. Shihav uddin
Lecturer

1. Shihavuddin, A.S.M.; Fadlullah, N ; K K Islam, "Micro-controller operated robot using photo sensor guiding system ", 1st International Conference on Control, Instrumentation & mechatronics , Malaysia, 28 - 29 May, 2007

DEPARTMENT OF MECHANICAL AND CHEMICAL ENGINEERING (MCE)

Prof. Dr.. Md. Abdur Razzaq Akhand
Head

1. "An Experimental Investigation of an Air-cooled Miniature Heat Pipe (MHP) using Different working fluids at different fill ratios" - Sakib Lutful Mahmood, Ashik Ahmed, Marzuq M. Hussain, M. Raju Hossain, A.R. Akhanda. Proceedings of 3RD BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December 2006, BA-173.

2. "Effect of Boosters on the Performance of a Built-in-Storage Type Solar Water Heater" Mohammed Hamed Salamah Al-Nahhal, M.A.R. Akhanda Proceedings of the Eleventh Asian Fluid Mechanics Congress held in Kuala Lumpur, Malaysia in 2006, pp 966 - 971.

3. "Universal Velocity and Temperature Distributions through Square Duct with Asymmetric Heating"Khan R.K., Ali M.A.T. & M.A.R. Akhanda, Proceedings of the Eleventh Asian Fluid Mechanics Congress held in Kuala Lumpur, Malaysia in 2006, pp 948 - 953.

4. "Study, Design and Fabrication of a Solar Powered Adsorption Refrigeration System", M. H. Rahman, A.R. Akhanda & A.K.M. Sadrul Islam, 2006 Proceedings of World Renewable Energy Congress IX (WREC IX) paper no A-27-ST13.

5. "Recent Solar Energy Activities in Bangladesh" M. A. R. Akhanda, Chowdhury A. A, 2005 Proceedings of the 9th World Multi-conference on Systemics, Cybernetics and Informatics (WMSCI), Orlando, Florida, USA on July 10-13, 2005, vol. IX, PP. 392-396.

Prof. Dr. A.B.M Zohrul Kabir

1. Prospect of E-Commerce for SMEs in Bangladesh. A B M Zohrul Kabir, Proceedings of the 4th Meeting of the OIC Task Force & Seminar on SMEs, Jointly organized by Islamic Chamber of Commerce & Industry, Royal Thai Government Ministry of Commerce, and Thai Islamic Trade and Industrial Association, January 2005

2. Development of Inter-firm Linkage and Business Network for the Light Engineering Sector in Bangladesh. ---A B M Zohrul Kabir Proceedings of the 3rd Meeting of the OIC Task Force & Seminar on SMEs, Jointly organized by Islamic Chamber of Commerce & Industry, Islamic Development Bank, Small & Medium Enterprise Development Authority (Pakistan), and Ministry of Industries & Production, Government of Pakistan, Lahore, Pakistan - pp. 152 - 158 16-18 March 2004

3. Poverty Reduction: Role of Engineering and the Choice of Renewable Energy. Kabir and S M A Shihan Proceedings of the National Seminar on "The Role of Engineers in Poverty Reduction", 48th Annual Convention of the Institution of Engineers, Bangladesh - pp. 85 - 91 A B M Zohrul 18-22 January 2004

4. Optimization Model for Opportunistic Replacement Policy Using Genetic Algorithm with Fuzzy Logic Controller-- Sardar Anisul Haque, A B M Zohrul Kabir and Ruhul Amin Sarker Proceedings of the IEEE Congress for Evolutionary Computation (vol. 4), Canberra, Australia - pp.2837 - 2843 9-11 December 2003

5. Selection of Renewable Energy Sources Using Analytic Hierarchy Process , A B M Zohrul Kabir, S M A Shihan, Indonesia - pp. 265 - 276 7-9 August 2003, Proceedings of the International Symposium on Analytic Hierarchy Process, Bali

6. Training SMEs in Engineering and Managerial Skill Development (Light Engineering Sector): Bangladesh Scenario --Kabir Z Proceedings of the 2nd Meeting of the OIC Task Force & Seminar on SMEs (2003), Jointly organized by Islamic Chamber of Commerce & Industry, Islamic Development Bank, Ministry of Industry & Trade, Maputo, Republic of Mozambique - pp. 176 - 194 ,19-21 May 2003

7. The Role of Research and Technology Institutions (RTI) in Training SME in Modern Technology Use and Skill Development ---Kabir Z and Hossain MA Proceedings of the First Meeting of the OIC Task Force & Seminar on SMEs (2002), Jointly organized by Islamic Development Bank, Islamic Chamber of Commerce and Industry and The Federation of Bangladesh Chambers of Commerce and Industry - pp. 127 - 137 Dhaka, Bangladseh, 27-29 January 2002

8. Assessment and Selection of New Technologies Using Multi Criteria Decision Making Approach---- Kabir Z and Hossain MA Proceedings of the 1st International Conference for Promotion of Suitable New Technologies (ICPSNT - 2001) - pp. 80 - 90 Amirkabir University of Technology, New Technologies Research Center, Tehran, Iran12-14 November 2001

9. A Stage Optimization Model for Opportunistic Replacement Policy--- Kabir Z and Samhan MSN Proceedings of the ICC & IE / IEMS 2001 Joint Meeting (International Conference on Industry, Engineering and Management Systems AND 28th International Conference on Computers and Industrial Engineering) pp. 723 - 728 Cocoa Beach, Florida, USA 5-7 March 2001

Prof. Dr. A.K.M. Sadrul Islam

1. M. Raju Hossain, M.H. Banna, Sakib L. Mahmood, A.K.M.Sadrul Islam, "Design and Simulation of a Planar Electroosmotic Micropump", Paper # BA-174, Proc. of 3rd BSME-ASME Int. Conf. on Thermal Engineering, (published in CD), 20-22 Dec 2006, Dhaka.

2. K. I. Iftekhar Uddin Khan, A.K.M. Sadrul Islam, Md. Tazul Islam "Development of Traditional Solar Salt Production In Coastal Area of Bangladesh", Paper # 106, Proc. of 3rd BSME-ASME Int. Conf. on Thermal Engineering, (published in CD), 20-22 Dec 2006, Dhaka.

3. M. M. Rahman , A. K. M. Sadrul Islam and T. Siikonen, "New v2-fu Model For Near-Wall Turbulence", Paper # 100, Proc. of 3rd BSME-ASME Int. Conf. on Thermal Engineering, (published in CD), 20-22 Dec 2006, Dhaka.

4. Mainul H Banna, S. L. Mahmood, M. Raju Hossain, A.K.M Sadrul Islam, "Mixed Convection in a Square Cavity Due to Heat Generating Body: Effect of Cavity Inlet Port Location", Paper # BA-175, Proc. of 3rd BSME-ASME Int. Conf. on Thermal Engineering, (published in CD), 20-22 Dec 2006, Dhaka.

5. A Bakar Siddique, Md. Arif H Mamun, C. M. Feroz, A. K. M Sadrul Islam "Natural Convection in a Triangular Enclosure" Paper # 177, Proc. of 3rd BSME-ASME Int. Conf. on Thermal Engineering, (published in CD), 20-22 Dec 2006, Dhaka.

6. M. Mamun, Y. Kinoue, T. Setoguchi, K. Kaneko and A. K. M. S. Islam "Improvement af the Performance of the Wells Turbine by using a Very Thin Elongated Endplate at the Blade Tip" , Paper # 014, Proc. of 3rd BSME-ASME Int. Conf. on Thermal Engineering, (published in CD), 20-22 Dec 2006, Dhaka.

7. Md. Tazmilur Rahman and A.K.M. Sadrul Islam, "Green Electricity Model for St. Martin's Island", Proceedings of World Renewable Energy Congress IX, Florence, Italy, 19-25 Aug 2006, in CD and Book of Abstract page #38.

8. M.H. Rahman, A.R. Akhanda and A.K.M. Sadrul Islam, "Study, Design and Fabrication of a Solar Powered Adsorption Refrigeration System", Proceedings of World Renewable Energy Congress IX, Florence, Italy, 19-25 Aug 2006, in CD and Book of Abstract page #189.

9. A.K.M. Sadrul Islam, Tawhid Ezaz and Arif Hasan Mamun, "Effect Of The Size Of Heated Strip On Natural Convection in a 3D Enclosure with Uniform Heat Input on One Side and Isothermal Wall on Other-Side", Proceedings of the Eleventh Asian Congress of Fluid Mechanics, Kuala Lumpur, Malaysia, 22-25 may 2006, in CD page# 202- 207.

10. Mohammad Arif Hasan Mamun, Tawhid Ezaz and A.K.M Sadrul Islam, "Natural Convection Heat Transfer from Discrete Heat Sources in a Three Dimensional Enclosure", Proceedings of the Eleventh Asian Congress of Fluid Mechanics, Kuala Lumpur, Malaysia, 22-25 may 2006, in CD page# 610 - 615.

11. Islam, M., Amin, M. R., Islam, A.K.M.S., "Renewable Energy Powered Rural Community Development Centers in the Developing Countries," Proceedings of the 2006 ASME Power Conference, Paper No. PWR2006-88085, Atlanta, GA, USA, 2-4 May, 2006.

12. M.M. Rahman, M.T. Islam and A.K.M. Sadrul Islam, "Potential of Fish drying using Solar dryer in Bangladesh", Proc. 5th International Mechanical Engineering Conference, IEB, Dhaka, 30 Sep-2 Oct, 2005, pp 58-64.

13. M. A. Wazed, M. T. Islam, M. I. Hoque , A.K.M. Sadrul Islam and M.S.U, Chowdhury, "Solar Salt Production in Bangladesh", Proc. 5th International Mechanical Engineering Conference, IEB, Dhaka, 30 Sep-2 Oct, 2005, pp 90-95.

14. M. Iqbal and AKM Sadrul Islam, "Importance of Ergonomics In Industrial Design", Proc. 5th International Mechanical Engineering Conference, IEB, Dhaka, 30 Sep-2 Oct, 2005, pp 134-138.

15. M Faisal Kader, A.K.M. Sadrul Islam, M. Hasan and T. Hussain, "Numerical Study of Convection between Two Connected Chambers", Proc. 5th International Mechanical Engineering Conference, IEB, Dhaka, 30 Sep-2 Oct, 2005, pp 171-176.

16. Mazharul Islam, M Ruhul Amin and A.K.M. Sadrul Islam, "Prospects of Solar Energy Applications in the Off-Shore Islands of Bangladesh", Proceedings of SESCI 2005 Conference, British Columbia Institute of Technology, Canada, Aug 20-24, 2005.

17. Mazharul Islam, A.K.M. Sadrul Islam and M. Ruhul Amin, "Small-scale Decentralized Renewable Energy Systems for the Remote Communities of the Developing Countries", Paper # PWR2005-50068, ASME Power, 5-7 April, 2005, Chicago, USA.

Dr. Nurul Absar Chowdhury
Associate Professor

1. Designing, Manufacturing and Controlling of a Pick & Place Robot having optimum specification ----Md. Mazedul Kabir, Md. Jakiul Hassan and Md Nurul Absar Chowdhury "" Mechanical Engineering Conferrence and 11th Annual paper meet, The Institution of Engineers (IEB), Bangladesh, Mechanical Engineering Division, 25-26 December 2006

2. "Simulation of Elastic Field during Unloading in Surface rolling / burnishing Md. N.A. Chowdhury and Md. A.U. Patwari" Mechanical Engineering Conferrence and 11th Annual paper meet, The Institution of Engineers (IEB), Bangladesh, Mechanical Engineering Division, 25-26 December 2006

3. "Improvement of surface quality using a frictionless cylindrical surface burnishing tool" Md. N.A. Chowdhury and Md. A.U. Patwari proceedings of International conference on Manufacturing Science and Technology (ICOMAST) 2006, 28 30 August, pp-345-348 Melaka, Malaysia

4. "Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process" Md. A.U. Patwari, Md. N.A. Chowdhury & Md. S.L Mahmud, proceedings of modeling and simulation conference, 03 05 April 2006, Malaysia, pp 582 586, paper code 183.

5. "Designing and Controlling of a Pick and Place Robot", Md. N.A. Chowdhury & Md. Anayet U. Patwari, proceedings of the 5th International Mechanical Engineering Conference & 10th Annual Paper Meet, The Institution of Engineers (IEB), Bangladesh, Mechanical Engineering Division, pp 211-216, 30 Sept-02 October 2005.

6. "Design of a system architecture for component handling system to promote research in automated manufacturing process" Md. Nurul Absar Chowdhury, Ashfaque Ahmed Chowdhury Proceedings of the 4th International Conference of Mechanical Engineers and 9th Annual Paper Meet, The Institution of Engineers (IEB), Bangladesh, Mechanical Engineering Division, 2004.

7. "Design of a control system for flexible material handling system to synchronize the speed of its different elements" Md. Nurul Absar Chowdhury, Md. Mezbahul Islam Proceedings of the 4th International Conference of Mechanical Engineers and 9th Annual Paper Meet, The Institution of Engineers (IEB), Bangladesh, Mechanical Engineering Division, 2004.

8. "Design and Manufacture of a feedback control system for a converted CNC lathe" Md. Nurul Absar Chowdhury, Ashfaque Ahmed Chowdhury, Proceedings of 9th Mechatronics Forum International Conference, August 30- September 1, 2004, Middle East Technical University (METU), Ankara, Turkey.

9. "Conversion of a manual lathe to CNC lathe" Md. Nurul Absar Chowdhury, Ashfaque Ahmed Chowdhury, Proceedings of the 3rd International Conference of Mechanical Engineers and 8th Annual Paper Meet on E-Manufacturing, The Institution of Engineers (IEB), Bangladesh, Mechanical Engineering Division, 20th - 22nd March, 2003.

10. "Sequence of calculations of Residual stresses when parameters of deformed zone are known." Md. Nurul Absar Chowdhury, Subjects matters of International Scientific and Technological Conference, Moscow, 1988.
11. "Development of a post-processor for metal forming process" Md. N.A. Chowdhury and Md. A.U. Patwari accepted to computer simulation conference 2006, July 30 to August 03, 2006, Alberta, Canada.

12. "Design and Development of System Architecture for Process Planning of A Milling Object using C programming" Md. N.A. Chowdhury and Md. A.U. Patwari accepted to Fourth Assiut University International conference on Mechanical Engineering Advanced Technology for Industrial Production 2006, December 12-14, 2006, Egypt

Dr. Aly Sabry Abo El-Lail
Assistant Professor

1. "Fuzzy Temperature Control of a Thermoelectric Cooler", A. S. Abo El-Lail, Ayman A. Aly, IEEE Conference (ICIT06), India, 15-17 Dec, 2006.

2. "Microprocessor Based Process Control", A. S. Abo El-Lail, Md. Shamsur Rahman Chowdhury, Zheng-zhan Jiang, Fourth Assiut University International Conference on Mechanical Engineering Advanced Technology for Industrial Production (MEATIP4), December 12-14, 2006.

3. "Temperature Control of a Thermoelectric Cooler", A. S. Abo El-Lail, Ayman A. Aly, the Eleventh Asian Congress of Fluid Mechanics (ACFM) May 22-25, 2006, pp 794-800.
4. "Robust Sliding-Fuzzy Control Technique of An Electro-Hydraulic Servo Systems", A. S. Abo El-Lail, Proceeding of the 3rd International Conference of Mechanical Engineers And 8th Annual Paper Meet on E-Manufactory, The Institution of Engineers, Bangladesh, Mechanical Engineering Division, 20-22 March, 2003, Paper No. 56, pp. 602-615.

5. "Tip Position Control of Single Flexible Robot Arm", T. Mansour, A. S. Abo El-Lail, A. Nassr, and A. Abo Ismail, IEEE 7th International Conference
On Intelligent Engineering Systems, March 4-6, 2003, pp.494-498.

Sakib Lutful Mahmood
Assistant Professor

1. "Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process" proceedings of modeling and simulation conference, 03 05 April 2006, Malaysia, pp 582 586, paper code 183.

2. "An Experimental Investigation of an Air-cooled Miniature Heat Pipe (MHP) using Different working fluids at different fill ratios" - Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December 2006, BA-173.
3. "Mixed Convection In A Square Cavity Due To Heat Generating Body: Effect Of Cavity Inlet Port Location", Proceedings of 3RD BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December 2006, BA-175.

4. "Design and simulation of a planar electro-osmotic flow micropump", Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December, 2006, BA-174.

5. "Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process" has been selected to publish for the best of book of the AMSE conferences held in 2006 in the AMSE Journal.

Muinul Hasan Banna
Lecturer

1. Mixed Convection in a Vented Rectangular Enclosure, 4th International Mechanical Engineering Conference & 9th annual Paper meet, Dhaka, 2004.

2. Numerical Study of Convection between Two Connected Chambers, 5th International Mechanical Engineering Conference & 10th annual Paper meet, Dhaka, 2005.

3 Effect of triangular ribbed evaporator surface on the performance of a two phase closed loop thermosphon, 11th annual Paper meet Dhaka, 2006

4. Mixed Convection In A Square Cavity Due To Heat Generating Body: Effect Of Cavity Inlet Port Location, 3rd BSME-ASME conference, Dhaka, 2006 Design and simulation of a planar electro-osmotic flow micropump, 3rd BSME-ASME conference, Dhaka, 2006

Raju Hossain
Lecturer

1. Design and Simulation of a Planer Electro osmotic Micropump M. Raju Hossain, M.H. Banna, Sakib L. Mahmood, A.K.M.Sadrul Islam (Bangladesh) Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December 2006,

2. Mixed Convection in a square cavity due to heat generating body: Effect of cavity inlet port location Mainul H Banna, S. L. Mahmood, M. Raju Hossain, A.K.M Sadrul Islam (Bangladesh) Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December 2006,

3. An Experimental Investigation Of An Air-Cooled Miniature Heat Pipe (Mhp) Using Different Working Fluids At Different Fill Ratios Sakib Lutful Mhamood, Ashik Ahmed, Marzuq M. Hussain, M. Raju Hossain, M. A.R.Akhanda. (Bangladesh) Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, held in Dhaka, Bangladesh, 20-22 December 2006,

DEPARTMENT OF INSTRUCTOR TRAINING AND GENERAL STUDIES (ITS)

Dr. Che Kum Clement
Assistant Professor

1. Che Kum, C. (2006). International Cooperation between Universities in the field of TVET & Human Resources Development: The formula of Islamic University of technology (IUT) Dhaka, Bangladesh. UNESCO-UNEVOC, GTZ & UNIP International Conference/Workshop on Innovation and Internationalisation in the Qualification of Technical and Vocational Education and Training (TVET) Experts for Asia and South Asia 22-25 November 2006: Colombo, Sri Lanka.

2. Che Kum, C. & Shahadat, H. Khan. (2006). Working and Learning: A Strategy for Lifelong Learning and Quality Workforce Development in Technical and Vocational Education and Training in OIC Member Countries. ICTVET 2006, UNESCO-UNEVOC International Conference in Technical and Vocational Education and Training, 22-23 August 2006, Johor Baru, Malaysia

3. Che Kum, C, Shamim Ahmed & Shahadat, H. Khan. (2006). "Concept of Lifelong Learning in Technical and Vocational Education and Training: The Practice of Islamic University of Technology (IUT), International Conference in Technical and Vocational Education and Training: Moscow, 20-24 August 2006.

4. Che Kum, C. (2006). Design and Development of Technical and Vocational Teacher/Trainer Education Qualification Framework and Professional Standards Technical and Vocational Education in the OIC Member Countries, International Conference on Preparing Teachers for a Changing Context" held at the Institute of Education, University of London 3-6 May, 2006.

5. Che Kum, C. (2005). International Master Degree in Technical Teacher Education: The Case of Islamic University of Technology (IUT): International Conference on Development and Implementation of Master Degree Standard for Teacher and Trainer Education in Technical and Vocational Education and Training (TVET) in East and South East Asia, Tianjin, China, December 9-10, 2005.

6. Che Kum, C. (2004). The State and Prospects of Teacher Education in Technical and Vocational Education in Bangladesh; UNESCO-UNEVOC International Conference on Innovation and Excellence in Technical and Vocational Teacher/Trainer Education: Hangzhou, China, November 2004.

7. Che Kum, C. (2004). An International Association of Technical and Vocational Education and Training Professionals: Its origin and Leadership for The Future. UNESCO-UNEVOC International Conference on Innovation and Excellence in TVET Teacher/Trainer Education: Hangzhou, China, 8 -10 November 2004.

8. Che Kum, C. & Shahadat, H. Khan. (2006). Work Process Orientation: An Innovative Curriculum Design Concept for Technical and Vocational Education and Training (TVET). International Workshop on Curriculum Development in Technical and Vocational Education: 19 - 21 November 2006, IUT Dhaka, Bangladesh.

9. Che Kum, C. & Shahadat H. Khan. (2006). Curriculum Design Strategies for Technical and Vocation Education and Training; International Workshop on Curriculum Development in Technical and Vocational Education: 19 - 21 November 2006, IUT Dhaka, Bangladesh.

10. Che Kum, C. (2005). Training of Trainers in Technical and Vocational Education for Quality Management and Improvement. International Workshop on "Managing Quality in Technical and Vocational Education," 14-17 November 2005 organised by IUT.

11. Che Kum, C. (2004). Planning for Innovative Teaching - Learning in Technical and Vocational Education (TVE); International Workshop on Innovative Approaches in Teaching for Teachers of Technical and Vocational Education: IUT, 28-30 November 2004.

12. Che Kum, C. (2003). "Quality of a Good Test and Interpretation of Test Scores." International Short Course on "Assessment of student learning for Quality Improvement in Technical and Vocational Education," 1-4 December 2003: IUT Dhaka, Bangladesh.

13. Che Kum, C. (2002). Design and Implementing Cost-Effective TVE Programmes for Achieving Sustainable Human and Socio-Economic Development. International Seminar on New Trends in Technical and Vocational Education, 2-4 November 2002: IUT Dhaka, Bangladesh

ENERGY AND ENVIRONMENT CENTER (EEC)

Prof. Dr. A. K. M. Iqbal Hussain
Head

1. "Design of a solar steam boiler system." Hussain A.K.M.I. Proceedings of the International Seminar on Renewable Energy for Poverty Alleviation (ISREPA), organized by the Institution of Engineers, Bangladesh. November 1999.

2. "Performance of a cylindrical parabolic solar concentrator". Hussain A.K.M.I., Ibrahim A.R. & Hossain M.A. Proceedings of the International Seminar on Renewable Energy for Poverty Alleviation (ISREPA) organized by the Institution of Engineers, Bangladesh. November 1999.

3 "Study of performance of a wetted pad direct evaporative air cooler in Bangladesh climatic conditions" Hussain A.K.M.I. Proceedings of the International Conference on Mechanical Engineering in the 21't Century organized by the Institution of Engineers, Bangladesh. January 2000.

4. "Problems arising from use of fossil fuels a critical review." Proceedings of the International Conference and Workshop on Critical Issues in Energy and Development Challenges for the OIC Countries Hussain A.K.M.I. " organized by the Islamic University of Technology, Dhaka. Section 11. November 2000.

5. "Horizontal axis wind turbine and its application for water pumping in Bangladesh." Hussain A.K.M.I., Islam M.Q. & Islam A.K.M.S. Proceedings of the International Conference and Workshop on "Critical Issues in Energy and Development Challenges for the OIC Countries" organized by the Islamic University of Technology, Dhaka. Section 11. November 2000.

6. " Contributions of fossil fuels in the development of OIC countries." Hossain M.I., Salek H.M. & Hussain A.K.M.I --Proceedings of the International Conference and Workshop on "Critical Issues in Energy and Development Challenges for the OIC Countries" organized by the Islamic University of Technology, Dhaka. Section 11. November 2000.

7. "Modification and study of performance of a cylindrical parabolic solar concentrator." Salek H.M., Islam M.T. & Hussain A.K.M.I. Proceedings of the BSME/ASME Joint International Conference on Thermal Energy . Dhaka. January 2002.

8. "Performance of a small locally made moist air silica gel dehumidifier." Hussain A.K.M.I. Proceedings of the 5th International Conference on Mechanical Engineering (ICME 2003), Dhaka, 26 28 December 2003.

9. "Study of performance of a small single basin shallow solar water still." Hussain A.K.M.I., Alam M.M., Ahmed S.M. & Rahman M.S. Proceedings of the 2 nd BSME ASME International Conference on Then nal Engineering at Dhaka, Bangladesh, 2 4 January 2004.

10. "Air pollution of Dhaka city due to vehicle emissions". Hussain A.K.M.I. Paper presented at the International Conference on Vehicles Alternative Fuel Systems and Environmental Protection (VAFSEP2004) organized at Dublin, Ireland by the Dublin City University on 06 09 July 2004. Paper published in the Conference Proceedings, 2004.

11. "Study of performance of a solar paddy dryer". Hussain A.K.M.I. Proceedings of the 4th International Mechanical Engineering Conference & 9th Annual Paper Meet held at Dhaka, Bangladesh, 29 31 December 2004.

12. "Environmental pollution from industries located in and around Dhaka City, Bangladesh". Hussain A.K.M.IProceedings of the International Conference on " Towards a Safe & Clean Environment (TSCE 05)" organized by the El Minia University, Egypt, 15 17 April 2005.

A Subsidiary Organ of OIC

Policy | Sitemap | Credits | Feedback